Going Through Knife Gate Valve
The GP model FCA knife gate valve is provided with a full bore. Its two half-bodies are internally machined and made of cast iron. Bi-directional valve with double seat and packing. The standard model is wafer type to suit DIN PN10 an ANSI 150 flanges.
The knife gate is made of stainless steel, polished on both sides, with a round edge to extend the life of the packing and the rubber seats. The knife gate can cut the fibrous particles and solid particles that are present in the fluid.
The gate slides through the full length of the body, When the valve is in open position, there are no dead corners in it and the valve becomes an extension of the pipe.
ANSI / DIN
DN50 to DN250: PN10 DN300 to DN400: PN6 DN450: PN5 DN500 to DN600: PN4
DN50/2'' to DN700/28''
|Sectors||Others Power Pulp and Paper Thermal Power Plants|
|Seat||EPDM, Metal/Metal, Nitrile, PTFE, Silicone, Viton|
|Operation type||Bevel Gear, Electric Actuator, Handwheel, Hydraulic Actuator, Lever, Pneumatic Actuator|
|Applications||Charged fluids, Paper pulp, Sludge, Slurry, Solids|
|Accessories & Options||Deflector cone, Emergency System, Emergency closing devices, Filters, Injection holes, Junction box, Limit Switches, Proximity switches, Reinforced socket, Scraper, Solenoid valves, Stem extension, V or pentagonal port|
Contact us and we will help you with any special application for this valve
Any question about this valve?
Please, fill the fields below to send us an information request