The GM model FCA knife gate valve is a double-seated design offering a bidirectional shut-off. These seats or rubber sleeves are provided with an internal metal core. While the valve remains in an open position the two rubber sleeves made of wear-resistant material are in contact with each other providing a sleeve pattern, thus preventing any contact between the fluid and the body of the valve.
The GM is a full flange type valve suitable to install between flanges or at the end of a line. It may be drilled acc. to ANSI 150 or DIN PN10. It is provided with a knife type gate in stainless steel which is polished on both sides with round-shaped edges for longer lasting of seats and packing elements.
ANSI / DIN
DN50 to DN400: 10 bar DN450 to DN600: 6 bar
DN50/2'' to DN1200/48''
|Sectors||Mineral Processing Minerals Others Pulp and Paper Steel Industry|
Contact us and we will help you with any special application for this valve
Any question about this valve?
Please, fill the fields below to send us an information request