FCA TE model is a rotatory control valve with an eccentric plug inside. The valve plug addopts an spherical surface that when turning the plug shaft from closed to open position, the eccentric plug design lifts off the seat smoothly, so open and close torque values are minimized.

TE model valves provides a good seal and high dynamic stability, in metal or soft seated designs (up to class V for metal seated and class VI for soft configuration).

This compact design valve performs high flow coefficient values (Cv) in comparison to globe valves so costs may be reduced to meet similar working conditions. Offers high rangeability values, even over 200:1 and can achieve linear or equal percentage flow characteristic curves. FCA quarter turn radial operation TE valves performs a tight shutt-off and a straight-through bore. Suitable for controlling slurries, high vicosity fluids, puld and paper, gases and vapours, etc...

Special materials for body and trim are available and flanges are supplied according to customer specifications. In sizes up to DN400/16''.